Resource Library

Assessment of the Electromagnetic Transparency of a Multilayer Radome at High Frequency

Presentation by Gilles Vogt, Inteliance Technologies.

When adding a radome to any network antenna, the transparency of the radome is a major concern, especially when the networks is tightly designed. A very large radome (6m long) has been modeled in Altair Feko (full wave MLFMM) in the GH

ATC Presentations, Videos

EM Simulation for Wireless Systems and Antenna Integration on Motor Vehicles

Presentation by Dr. Ahmadreza Jafari, Radio Reception and Antenna Expert, & Phillippe Boutier, Référent RadioFréquence at Renault.

In this presentation, different examples of Renault RF simulations regarding antenna applications such as keyless entry and ignition, AM/FM/DAB radio, radar a

ATC Presentations, Videos

Prediction of Magnetic Field Emitted by Train Motor Cables

Presentation by Vincent Ardon, EMC Engineer at ALSTON Tarbes.

Due to the environment, more and more compact with signaling systems functioning from a few dozen of Hz to GHz close to train motors or traction cases, the prediction of magnetic field emitted by motor cables could help train d

ATC Presentations, Videos

Airbus Global Migration to Altair HyperWorks for Modeling and Visualization

Presentation by Christophe Rigou, Linear & Non-Linear Solutions - ESCSAN at Airbus.

To support the next aircraft development and new derivative programs, AIRBUS Commercial Aircraft division has chosen HyperMesh and HyperView pre&post-processing software developed by Altair. The Patran t

ATC Presentations, Videos

Multibody Modeling of Armored Car at Off-road Conditions using MotionView

Presentation by Dr. Vadim Favorsky, Senior R&D Engineer at Plasan Sasa.

In this presentation results of multibody modeling are compared to experimental results of a middleweight armored car. The car prototype which was built by Plasan Sasa, has a monocoque chassis construction to save wei

ATC Presentations, Videos

Simulation-Driven Development of Lightweight Brakes with Heavyweight Performance

Presentation by Martin Wollstad, Computational Engineer at Haldex Brake Products.

ATC Presentations, Videos

Detailed Nonlinear Model for the Analysis of a Wind Turbine Pitch Bearing

Presentation by Aitor Fernandez, Mechanical Engineer at IK4-Tekniker.

The mechanical behavior and failure mechanisms of a wind turbine pitch bearing are very different from those of other bearings types designed for traditional applications. On the one hand, there is the effect of the low r

ATC Presentations, Videos

High Frequency Electromagnetic Simulation

In the session there are great presentations from high quality speakers from industry sectors including automotive, aviation, aerospace railway industry, as well research.
A wide variety of applications are covered, from antenna design and integration, to influences of radome structures on such sys

ATC Presentations, Videos

Non-linear Simulation and Optimization

Mechanical Simulation Seminar held during the 2018 Global ATC in Paris, France on October 18, 2018.

ATC Presentations, Videos

Project Invincible - Advanced Chest Protection

Presentation by James Helliwell, Design Engineer at McLaren Applied Technologies.

In this presentation McLaren Applied Technologies, the advanced technology, innovation, and design company will discuss the background, design process and results of a project to develop a highly bespoke pro

ATC Presentations, Videos

A Motivating, Inspirational Forum for Learning: Thoughts from Attendees at the 2018 Global ATC

Thoughts from attendees express the energy and passion emanating through the exchange of knowledge, information, ideas and stories by technology leaders and industry executives at the 2018 Global Altair Technology Conference.

Video Testimonials

Increasing the Productivity of Tooling Applications with 3D Printing and Multiphysics Simulation

Presentation by Stefan de Groot, Head of Development and Engineering at PROTIQ.

Injection molding tools and high conductive copper inductors are two prominent examples where the symbiosis of Simulation driven Design and Additive Manufacturing provides dramatic potential to increase the pr

ATC Presentations, Videos

Optimal AM Part Design Combines Advanced Design Tools and DfAM Thinking

Presentation by Marc Saunders, Director of Global Solutions Centres at Renishaw.

Most design for additive manufacturing (DfAM) is not really worthy of the name - 'adapt to AM' would be a better description. Parts are often designed for function rather than manufacturability, requiring a f

ATC Presentations, Videos

New Developments in Technology and Process for Design for Additive Manufacturing

The focus of these presentations address in particular, how to create economic applications by combining new manufacturing technologies and a simulation driven design process.

Leading industry representatives present successful applications of additive manufacturing in combination with ne

ATC Presentations, Videos

Designing Recurring AM Products for Ariane Launchers. Pushing Technology to Industrial Applications with New Design Tools and Processes

Presentation by Marta García-Cosío, CITD HO Engineering & Additive Manufacturing at CITD.

This presentation outlines a novel design approach that gives the opportunity of reducing the number of parts comparing with the traditional design while keeping the same functionality, achieving mas

ATC Presentations, Videos

Simulation, 3D Printing, and Casting the Perfect Symbiosis for Large Aerospace Structures

Presentation by Mathieu Deloubes, Innovation Project Manager at SOGECLAIR.

Manufacturing capabilities are still restrained by the size of 3D printing machines, which makes today the technology unsuitable for larger components. Investment Casting and pattern 3D printing is an answer, with th

ATC Presentations, Videos

The Role of EMC Simulation and Virtual Drive Testing in the Development of Electric and Hybrid Vehicles

Presentation by Jordi Soler, VP of Global Business Development, Electromagnetic Solutions at Altair.

Electrified, connected, autonomous and shared are four converging mobility megatrends having game-changing effects on the automotive and transportation market. These trends are like to dri

ATC Presentations, Videos

Design for the Future of e-Mobility

The global automotive industry is on the verge of disruption with electrification being one of the major trends. In this session we will discuss the challenges and opportunities engineers are facing in the design of the future e-Mobility, includin...

ATC Presentations, Videos

Optimization Driven Motor Design - Processes and Methodology

Presentation by Lars Fredriksson, Business VP - Simulation Driven Innovation at Altair.

This presentation offers insight how Altair has approached the challenge of improving the total design balance in E-motor development. The presented study has been executed with active support of Porsche AG.

ATC Presentations, Videos

Highly Optimized Passive Lubrication System for an EV Transmission

Presentation by Dr. Milos Stanic, nanoFluidX Product Manager at Altair.

Optimising the rotational losses of an EV transmission is essential to improve range. Whilst bearing and gear losses are well understood, the interaction between rotating components and transmission fluid rarely explo

ATC Presentations, Videos

Simulation-based Design of a Traction Battery Cooling Plate

Presentation by Frank Cord Lohmann, Project Manager at Altair.

The steady shift from conventional (combustion) powertrains to hybrid or full electric powertrains goes hand in hand with a steady increase in traction battery size, power and capacity. While passive cooling (air cooling) migh

ATC Presentations, Videos

Model-Based Development with Altair - Introduction and E-Mobility Use Cases Systems Simulation

Presentation by Andy Dyer, Senior Tech Specialist at Altair.

In this presentation, we'll take a look at a few examples of e-Mobility systems models built with Altair Activate and Compose and integrated with other tools like Flux, for electromagnetic simulation for electrical machines (mot

ATC Presentations, Videos

Validation: Minimizing Risk and Maximizing Part Quality

Presentation by Rainer Böke, CEO at Böke-IE GmbH & Co.

A cast shock-tower is used to describe the procedure for using simulation with Inspire Cast. The investigation of the gating technique related to large-area, thin-walled components is described. How can thicker sections deviating from

ATC Presentations, Videos

Automotive NVH Development - Past, Present, and Future Technology Challenges

Dr. Per-Olof Sturesson, Senior Director Driving Dynamics and Noise & Vibration Centre at Volvo Cars, keynote presentation at the 2018 Global ATC in Paris, France.

Over the last decades, the utilization of CAE has increased substantially in the vehicle NVH refinement process. Today CAE is a fully

ATC Presentations, Videos

Quoting & Tooling: How to Improve Quoting through Casting Simulation

Presentation by Rainer Böke, CEO at Böke-IE GmbH & Co.

At the beginning of a project there is often the wish to calculate components even though there is no order yet. It is shown how a component can be calculated to identify specific problem areas without much effort and without high cos

ATC Presentations, Videos

Design: Taking Decisions Based on Concept Simulation – The Symbiosis of HPDC and Structural Optimization

Presentation by Felix Radisch, Technical Manager for solidThinking.

ATC Presentations, Videos

Challenges and Opportunities for Manufacturing Staff Members through Casting Simulation

Presentation by Rainer Böke, CEO at Böke-IE GmbH & Co.

New software products, new license models and completely unknown fem-method are aspects that affected employees have to deal with. On the other hand there are many possibilities to support the employees by the use of a simulation soft

ATC Presentations, Videos

Simulation-driven Design and Manufacturing

Design for Manufacturing seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

The Digitalization Trends and Structural Design in Maritime Industry

Dr. Toshiro Arima, Corporate Officer, Director of Rule Development and ICT Division at ClassNK, keynote presentation at the 2018 Global ATC in Paris, France.

In this presentation, the current state of digitalization of maritime industry, structural rules and evaluation software used for hull st

ATC Presentations, Videos

Experimentation Matters: Driving Innovation Through Simulation

Prof. Stefan Thomke, William Barclay Harding Professor of Business Administration at Harvard Business School, keynote presentation at the 2018 Global ATC in Paris, France.

Why do companies constantly come out with exciting innovations while others have great difficulty? Professor Thomke shows tha

ATC Presentations, Videos

Zaha Hadid Presents Innovation in AEC

Eddie Can, Senior Associate at Zaha Hadid Architects, keynote presentation at the 2018 Global ATC in Paris, France.

During his speech Mr. Can will focus on the relationship between highly complex design documents and construction technique that minimize cost while working on a custom and double c

ATC Presentations, Videos

Inspire Platform Manufacturing Simulation Roadmap

Presentation by Martin Solina, Project Manager at Altair.

ATC Presentations, Videos

Introduction to Manufacturing Simulation-Driven Design

Presentation by Martin Solina, Project Manager, and Ulrich Bruder, Vice President Global Partner Sales, at Altair.

ATC Presentations, Videos

Design of an Inverted Pendulum

Presentation by Nic Minnaar, Application Engineer at Altair.

ATC Presentations, Videos

Vision for the Altair Academic Program

Presentation by Matthias Goelke, Senior Manager at Altair.

ATC Presentations, Videos

Time-Constrained Prototype Development - Learning the Product Development Process

Presentation by Prof. Matthias Leiner & Prof. Michael Magin from the University of Applied Science Kaiserslautern.

The presentation focuses on learning and teaching the product development process in the English/German-speaking master program in mechanical engineering/mechatronics at Hoch

ATC Presentations, Videos

Teaching & Learning Simulation Driven Innovation

The focus of this seminar is on teaching and learning Simulation Driven Innovation and Altair's Academic Program. We will hear from academic leaders all over the world on how they are equipping engineering students for their future careers. Join us for an exciting and engaging program.

Pr

ATC Presentations, Videos

Innovation & New Technology Integration into Engineering Curricula

Presentation by Clive Hands from Nelson Mandela University.

A challenge facing all academic institutions teaching engineering in today’s rapidly evolving technological climate, is how to remain relevant as traditional methods of doing things are disrupted either partially or completely, by new an

ATC Presentations, Videos

The Impact of Deep Learning in CAE

Presentation by Prof. Michel Bercovier from the School of Engineering and CS, Hebrew University of Jerusalem.

Artificial Intelligence (AI) has had a bumpy history with highly fashionable periods followed by lows. Its applications in CAE , that is Mechanical Engineering and Simulations as

ATC Presentations, Videos

Using Altair Compose Calculations & Scripts to Improve and Accelerate CAE Processes

Learn how to use Compose for 0D modeling & simulation, as complementary to 1D and 3D CAE simulations – to perform useful numerical computations; to do parametric modeling; to create scripts; to automate commonly repeated product development proces...

ATC Presentations, Videos
465 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!