Resource Library

A Unique Car Concept for Urban Space

Udi Meridor, Chief Innovation Officer at Israeli startup, City Transformer, talks about the thinking behind the design of this revolutionary design for urban transport. They have decided to rethink the future of the city car and create a cleaner ...

Customer Stories, Videos

Gulplug Drives Innovation in the Charging Industry with Altair's Startup Program

Xavier Pain, Founder & CEO at Gulplug, discusses how Altair's Startup Program enabled his team create an autonomous magnetic based charging solution for electric vehicles.

Customer Testimonials

SOGECLAIR aerospace

SOGECLAIR aerospace, part of the SOGECLAIR S.A. group, is a major engineering partner and prime
contractor for the aerospace industry. For the design of an aircraft access door, to leverage the full potential of the combined methods of additive manufacturing and casting, SOGECLAIR used the Altair

Customer Stories, Customer Testimonials

What Can We Learn from Nature for Modern Architecture Structures?

Eric Rusinol, an Architect from The Sagrada Família Foundation, gives us some insight into the project to finish Antoni Gaudí's iconic Cathedral in Barcelona, touching on the teams use of optimization and concept generations technologies from Alta...

Video Testimonials

What’s the Secret to Product Innovation?

Find out how we can help increase your innovation intelligence™ in order to grow, expand and succeed.

Videos

Additive Manufacturing of a Satellite Antenna Bracket

Analysis and design of a 3D printed antenna support for the Sentinel-1b satellite by RUAG Space with Altair Products.

Video Testimonials

Ping Golf: Using CAE and HPC for Virtual Prototyping

In this short interview Eric Morales, Sr Research Engineer at PING Golf, explains how combining CAE simulation with the latest HPC technology has greatly reduced product development time.

Video Testimonials

Specialized Wins at Le Tour de France with Altair HyperWorks

Learn how Specialized analyzed and improved the aerodynamic performance as well as optimized the weight and structural efficiency of the new S-Works Venge frame.

Video Testimonials

Ford's Thoughts on Relationship with Altair for Lightweighting

John Viera, Global Director, Sustainability and Vehicle Environmental Matters at Ford Motor Company, gives his thoughts on the relationship with Altair and its importance as the company continues to drive down vehicle weight.

Video Testimonials

Ford Research Center - Interview with Dr. Niels Pasligh

Niels Pasligh from Ford Research Center Aachen, Germany, is talking about his team's challenges and how they work with Altair products to tackle these.

Video Testimonials

Supporting Blake Leeper’s Road to the 2016 Rio Olympic Games

Altair Thinklabs is proudly working together with Eastman Innovation Lab and Blake Leeper, US Paralympics Gold Medalist, on a clean sheet, human-centric design approach to advance running prosthetics technology.

Videos

Honeywell Aerospace - Reducing the Weight of Aircraft Engines

Brian Cottrell, Chief of Structures at Honeywell Aerospace, discusses how Altair ProductDesign applied HyperWorks' optimization technology, OptiStruct, to minimize the weight of new aircraft engines.

Videos

Speed and Safety- Interview with Luca Pignacca of Dallara Automobili

Manufacturing and supply of Racing Cars, Dallara Automobili uses HyperWorks to help design all of their racing cars.

Video Testimonials

RUAG Space Builds Reliable Satellites with HyperWorks

“Throughput time” or “Time to Market” is a key element for spacecraft structure. Structures are the first element required to start the integration of the spacecraft and it is essential that they can be delivered in time. However, late inputs requ...

Videos

Phil Hall from Caterham Composites Discusses a Composite Optimization for a Racing Yacht

Phil Hall, Managing Director of Caterham Composites, discusses some of the challenges involved in the design and manufacture of carbon fiber composites for the automotive and aerospace markets. During the interview, Phil reveals details of a joint...

Videos

TK Mattingly Discusses Water Landing Simulation of the NASA Orion Crew Module

T.K. Mattingly, former Apollo Astronaut and Director of Space Enterprise for Systems Planing and Analysis, reveals how he worked with Altair ProductDesign to simulate the water landing of the NASA Orion Crew Module.

Video Testimonials

Interview with Richard Slade on the EADS Astrium ExoMars Project

This interview with Richard Slade from EADS Astrium gives an insight into the ExoMars Space exploration project. Richard discusses the goals of the project and some of the engineering challenges faced when designing the landing systems for the Rov...

Videos

New Features in Altair HyperMesh

Series of new feature videos for Altair HyperMesh within the Altair HyperWorks 2019 release

Videos

Socomec & Altair SmartWorks - Delivering Leading-Edge IoT Solutions

France-based Socomec’s specialty is providing low-voltage energy installations, from equipment to monitoring, where energy is critical – robust and ultra-reliable solutions for buildings like datacenters, solar plants, utilities, and hospitals. Us...

Customer Testimonials

Solar Car Challenge: Pushing the Boundaries using Composites Optimization

Raphael Gerard, Design Engineer at Gurit, discusses the use of composite optimization with Altair OptiStruct to reduce weight and increase performance in a solar car challenge.

Download the Presenta

Videos

JEC World 2019 Conference - Empowering Composites Innovation with Simulation

Altair hosted a conference at the JEC World composites expo in which leading innovators across multiple industries discussed how they leverage computer-aided engineering (CAE) simulation software to design, optimize, and validate their composite structures.

Videos

New Developments in Technology and Process for Design for Additive Manufacturing

The focus of these presentations address in particular, how to create economic applications by combining new manufacturing technologies and a simulation driven design process.

Leading industry representatives present successful applications of additive manufacturing in combination with ne

ATC Presentations, Videos

Quoting & Tooling: How to Improve Quoting through Casting Simulation

Presentation by Rainer Böke, CEO at Böke-IE GmbH & Co.

At the beginning of a project there is often the wish to calculate components even though there is no order yet. It is shown how a component can be calculated to identify specific problem areas without much effort and without high cos

ATC Presentations, Videos

Lead Time Reduction in Modeling and Visualization

Seminar held during 2018 Global ATC in Paris, France on October 16, 2018.

ATC Presentations, Videos

Developing the Electric Drivetrain of Tomorrow - How Numerical Tools can Support Cooling and Lubrication System Development

Presentation by Johannes Winklinger, Energy & Fluid Expert at Magna Powertrain.

We are right at the beginning of the new mobility era with deep impact on the architecture of cars. Hybridization and electrification are the dominating topics in the automobile industry and consequently the power

ATC Presentations, Videos

Virtual Tryout - Digitalization for an Efficient Commissioning of Forming Tools

Presentation by Dr. Lars Penter, Head of Machine Technology at University of Dresden.

The life cycle of a forming tool consists of five major phases. It starts with the process and tool design followed by its assembly, the ramp-up and serial as well as spare part production. Due to every

ATC Presentations, Videos

The Central Place of an Image Rendering Tool in an Architectural Conception Process

Presentation by Jean Thiriet, Thea Render.

Within the course of an architectural project, the meeting of client objectives, site constraints and the architect's ideas gradually shapes the future building.

At the heart of this creative process, a virtual model is used to bring toget

ATC Presentations, Videos

DSA Showcase Video

A brief introduction to DSA, their two products available through the APA, and how they are applied to the oceanographic engineering process.

Video Testimonials

Sunshine School Bus Design Story - Industrial Design for Automotive

Sathiya Seeland, Head of Styling for Product Design at Ashok Leyland, presents at Converge 2016 in Bangalore, India.

ATC Presentations, Videos

Designing Optimized Aluminum Castings with Fatigue Life Considerations

Andras Tanos, R&D Engineer at FemAlk ZRT, talks about how they have used Altair solutions for topology optimization of an engine part.

Video Testimonials, Videos

Alpla Develops Innovative Packaging Solutions with HyperWorks

Alpla develops and produces packaging solutions for consumer goods. Christoph Plankel, Head of Modeling and Simulation Department at Alphla, discusses how they have used simulation to produce lighter packaging without compromising on performance.

Customer Stories, Video Testimonials

Webinar: Real Time Engine Simulations in LOGEengine 3.0

The webinar will introduce all new features of our latest product release LOGEengine 3.0 and discuss the steps needed to setup an engine combustion analysis with detailed chemistry.

Videos, Webinars

National Electric Vehicle Sweden (NEVS)

Due to a long-standing relationship with Altair and its HyperWorks suite of simulation solutions, NEVS approached Altair ProductDesign to see if the interior quality issue could be tackled with simulation. To perform the project, Altair ProductDesign worked on site alongside NEVS Interior
Simulatio

Customer Stories, Videos

SEAM Online Tutorials

Cambridge Collaborative, Inc and the Altair Partner Alliance are pleased to bring you a free video series to become better acquainted with the software through a series of online tutorials.

eLearning, Getting Started, Tips & Tricks, Training Materials, Tutorials, Videos

Charge Online Tutorials

Fieldscale is pleased to bring you a free collection of tutorials to become better acquainted with the software.

eLearning, Tips & Tricks, Training Materials, Tutorials, Videos

Introduction to SimLab

SimLab is a process oriented, feature based finite
element modeling software that allows you to
quickly and accurately simulate engineering behavior of complex assemblies.

Videos

Introduction to HyperMesh

Altair HyperMesh is a high-performance finite element pre-processor to prepare even the largest models, starting from import of CAD geometry to exporting an analysis run for various disciplines.

Videos

Customer Story: Peter Macapia

Dr. Peter Macapia discusses solidThinking's part in reinventing structural systems and rethinking what a building is.

Customer Stories, Video Testimonials

Overview of the Liquid Natural Gas (LNG) Tank System Design Project

Regu Ramoo, Director of Engineering at Altair Productdesign explains the work conducted with with Prof. Lamb of the University of Michigan to improve the design of a LNG tank system. Altair ProductDesign developed an innovative central interconnec...

Videos

Thermal and Impact Analysis of a Nuclear Flask Design

Thomas Goulding, Senior Mechanical Engineer at Assystems presents at the UK ATC 2019. Nuclear transport flasks are used to store and transport nuclear waste material. When transported on public roads the flask must fulfil International Atomic Ener...

ATC Presentations, Videos
369 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!